Demo store · AIPhoundry test product · not for sale

Every board on your desk, in one tower.

StackSmith SR-8 is an 8U desk rack on the 10-inch standard. A Power Spine at the back holds your own power strip and USB-C charger; slide-in modules hold a Mac mini (with a front power button), six Raspberry Pis on blades, ten ESP32 boards on cards and five power banks standing up to charge. This page runs on synthetic test data: checkout is switched off and nothing ships.

StackSmith SR-8 Full Stack

8U desk tower on the 10-inch rack standard with the Power Spine, Mac mini sled, Pi blade bay (4 blades), ESP32 card rail (10 cards), power bank dock and vent blank. $299 plus shipping. Demo: synthetic test data, not for sale.

$299.00 (demo: not for sale)

Questions

Can I buy one?: Not yet. This is a demo of the AIPhoundry flow with synthetic test results; checkout is off and no units exist.
Will my Mac mini fit?: The M4 (127 mm) and the M1/M2 (197 mm) fit the 2U sled; a round cap at the front presses the M4's power button underneath. Mac Studio does not fit.
Which Raspberry Pis and ESP32 boards fit?: Pi 5, 4 and 3 with coolers and HATs up to 31 mm, six to a bay. ESP32 dev boards 17 to 31 mm wide, ten to a rail.
Which power strips and chargers fit?: UL or ETL listed strips 40 to 70 mm wide and up to 300 mm long, and USB-C chargers or hubs 45 to 95 mm wide. Never plug one strip into another.
Which power banks fit?: Up to 36 mm thick and 180 mm long, upright with the cable through a rear notch; shims for thin ones. 24,000 mAh bricks are too thick.
Do the modules fit my DeskPi RackMate?: Yes: 236.5 mm hole centres and M6 screws. Without rear slots they hang on the front screws, so keep them under 3 kg.
How much can it hold?: 5 kg a module, 20 kg in all. Keep the heaviest things low.
What does shipping cost?: About $24 by UPS Ground to US addresses (7.6 kg carton).

AI agents: see llms.txt to browse and order through the API.